AnkerMake M5 3D Printer

Lista želja
Anker
> > SKU: 194644106935
Uporedi

Uporedi

Opis

[1] AnkerMake M5 je sposoban za štampanje brzinom od 500 mm/s i ubrzanjem od 5.000 mm/s² sa novom nadogradnjom Fast Mode. 500 mm/s je maksimalna brzina ekstrudera AnkerMake M5 kada se koristi Fast Mode. Nadogradite firmver na verziju V2.0.93_2.0.72 ili noviju, AnkerMake Studio na verziju V0.9.22_3 ili noviju, a aplikaciju AnkerMake na verziju V1.0.7 ili noviju da biste imali nadograđenu brzinu.
[2] Testove je sproveo AnkerMake u septembru 2022. koristeći AnkerMake M5 3D štampač pri standardnoj radnoj brzini od 250 mm/s. Rezultati testa odražavaju približne performanse AnkerMake M5 3D štampača. Testirani model je bila standardna kocka zapremine 50×50×50 mm³.
[3] AnkerMake je sproveo testove u aprilu 2023. koristeći AnkerMake M5 3D štampač pri standardnoj radnoj brzini od 250 mm/s i brzini u Fast Mode od 500 mm/s sa prethodno isečenim laboratorijskim testnim modelom. Sljedeći rezultati testiranja odražavaju približne performanse AnkerMake M5 3D štampača:

Parametri štampanja

AnkerMake M5:
Layer Height: 0.25 mm
Infill Overlap Percentage: 5%
Wall Line Counts: 2
Layers Printing Speed: 500 mm/s

Benchmark:
Layer Height: 0.2 mm
Infill Overlap Percentage: 5%
Wall Line Counts: 3 Layers
Printing Speed: 50 mm/s.

Modeli preuzeti sa:
Benchy: 3DBenchy.com
[4] The distance from the extruder gear to the top of the melting chamber is 58 mm. The same distance in other distal extrusion 3D printers is around 400 mm.
[5] The reduction ratio of AnkerMake is 9.37, compared to regular 3D printers with a reduction ratio between 3.0 to 3.5.
[6] The volume of the heating block in AnkerMake is 6,000 mm³, compared to other 3D printers with a heating block volume of 4,000 mm³.
[7] The extruder of AnkerMake M5 has two fans inside. The output of air volume is 130% larger than a single fan.
[8] Only AnkerMake Studio Supports Error Detection.
[9] The 3D printer needs to be connected with the AnkerMake App. The app only works when all linked devices are connected to the Internet.
[10] Tests were conducted by AnkerMake in Aug. 2022 comparing AnkerMake M5 3D Printer at a standard operation speed of 250 mm/s and another 3D printer at a standard operation speed of 50 mm/s. The average AC power printing in 10 minutes of AnkerMake M5 was 110 W, and the other printer was 80 W during the printing process. When printing time is cut by 70%, power consumption is reduced by 59%.
Nozzle Temp: 428°F (220℃)
Print Bed Temp: 140°F (60℃)
Ambient Temperature: 77°F (25℃)
Filament: PLA
Test Equipment: Wattmeter